When you purchase a Capital Play in-ground trampoline from RuffHouse Vinyl Play Systems, you will get a quality, user-friendly product that offers easy assembly and installation from an in-ground trampoline company in Phoenix.
If the task is too much to undertake yourself, contact us for a free estimate to install your in-ground trampoline, download the full PDF here:
Mark the hole before you dig it. Draw a line in the ground as your guide for digging and make sure the hole is a few inches wider than the trampoline itself.
Check the chart below to find the size hole you should dig that is appropriate for the dimensions of your Capital Play in-ground trampoline.
Mark the hole before you dig it. Draw a line in the ground as your guide for digging and make sure the hole is a few inches wider than the trampoline itself.
Check the chart below to find the size hole you should dig that is appropriate for the dimensions of your Capital Play in-ground trampoline.
Put the trampoline together by first assembling the top and bottom sections of the frame, followed by the mat and springs. Then secure the frame to the retaining wall.
Attach springs at 3, 9, 12, and 6 o’clock positions first. This makes it easier to attach the following springs and ensures even tension.
When placing the trampoline onto the ledge, ensure that the in-ground trampoline frame is the correct height to make it flush with the ground, then proceed with back-filling the gap.
Compact the soil easily with the handle of your shovel. Pack it down tight to avoid issues in the future.
Once all the measurements, digging, and hard work is complete, attach the TDU vented pads to the trampoline frame, and you can start your fun on your Capital Play in-ground trampoline from RuffHouse Vinyl Play Systems, a local in-ground trampoline retailer!
Jump and enjoy!
© 2025 Ruffhouse Vinyl Play Systems.
